Burn Out

Prevest Burn Out 3D Resin

Prevest Burn Out 3D Resin material is an easy burnout material for printing cast crowns, bridges, and frameworks of all kinds. The printed material can be burned out without leaving any residue. The specialty of material is accurate fitting with smooth production sequence and reproducible results. The material is designed to print at 50 micron and 100 micron using LCD/DLP & SLA printers. Available in Red color.

Indications

• It is used for 3D printing of burn out frames in Casting of partial dentures, crowns and bridges, inlays, onlays and veneers.

Benefits

• Easy to work and accurate
• Suitable for casting copings, substructures, crowns, and more
• Burns clean with no residue left after burnout

Chemistry

• Functional (Meth)acrylic resins, Photoinitiators and Pigments

Technical data

• Flexural Strength > 60 MPa
• Flexural Modulus > 1500 MPa
• Residual Ash Content 0.1%

Presentation

• Ref: 250g Sample Bottle (Ref: 18019)
• Ref: 18011 : 1 x 500g Bottle
• Ref: 18012 : 1 x 1000g Bottle